Topcon CT-800, a non-contact computerized tonometer for measuring intraocular pressure. Clear 8.5-inch touchscreen to control all functions with one touch. The base moves more smoothly due to a 23% reduction in weight compared to previous tonometer models; an improved joystick simplifies the operation of the CT-800. A soft jet of air ensures the accuracy of […]
The device offers various measurement options:
🔹 Keratometry measurements using Pentacam.
The gold standard in anterior segment tomography, Pentacam performs a comprehensive examination of the anterior segment, including measuring the anterior and posterior surfaces of the cornea, the real total optical strength of the cornea (TCRP map), pachymetry and many other parameters.
🔹 Measurement of the axial length of the eye
The noninvasive optical biometrics method based on the technology of partial coherent interferometry allows you to quickly obtain all the necessary data for the calculation of IOL.
🔹 Combined measurement
Both measurements: keratometry and PZO of the eye, are made along the same axis, taking into account the micro-movements of the eye, allowing you to get the most reliable data.
🔹 Modern IOL calculator
Pentacam AXL allows you to get reliable data and make calculations even in the most difficult cases, for example, after LASIK, PRK, RK. Special formulas will help in any case.
Manufacturer: i-Optik (Ningbo Ming Sing Optical R&D), China
Description:
Computerized vision tester (digital phoropter) for subjective refraction. Fast, low-noise lens switching; two-in-one tablet + keyboard operation with an Android/iPad app over Bluetooth; split prism unit.
Application:
Subjective refraction for spectacle and contact lens fitting; synchronous operation with the CM-1900P chart monitor.
Medical equipment in Tashkent is supplied from trusted manufacturers. The non-contact tonometer of this modification has the following advantages:
– automated control via touch screen;
– readings are obtained quickly and reliably;
– the equipment is compact and flexible;
– air jet is soft;
– calculation of the corrected IOP value.
Advantages of the 5M Keratograph:
<
<
</
Manufacturer: MediWorks, China
Description:
The DEA520 is a “2 in 1” multi-purpose instrument integrating corneal topography and a complete dry eye workup. It uses a 50-ring Placido disc with three light sources (white, infrared and cobalt-blue) and delivers 14 integrated examinations on a 10.1″ 2048 × 1536 touchscreen.
Application:
A complete non-invasive dry eye examination: questionnaires (OSDI, SPEED, McMonnies, DEQ-5), NIBUT, tear meniscus height, lipid layer thickness, meibography, blink quality, conjunctival redness and fluorescein staining. The topography channel provides curvature, elevation and refractive power maps for keratoconus assessment and orthokeratology, RGP and soft contact lens fitting.
Manufacturer: OCULUS, Germany
Description:
The OCULUS Pentacam® AXL Wave combines five core technologies in one device: Scheimpflug tomography, optical biometry, wavefront aberrometry, retroillumination, and objective refraction. It provides a complete diagnostic picture of the anterior segment, making it ideal for refractive and cataract surgery planning and follow-up.
Application:
The Pentacam® AXL Wave is ideal for modern ophthalmic practices requiring high-level diagnostics for surgical planning and postoperative management. It supports accurate IOL calculations, early detection of corneal disorders, and evaluation of visual quality.
Included:
</
This device is used to measure the refractive power of the eye and to check binocular functionality. The compact design of the camera lens makes it possible to see the patient’s face. The distance visual acuity test table can be controlled by the 1 Dial controller. PD (Interpupillary distance) and alignment of the anterior chamber […]
Doctor’s block
— lower giving of tools;
— touch control panel;
– gun water / air / spray;
— 3 tubing connector M4;
– negatoscope;
– silicone autoclavable mat.
М10-400
Small dermatome tip (40 mm)
autoclavable
16,000 cpm
290 x 65 x 50 mm / 730 g
М10-500
Dermatome tip (80 mm)
autoclavable
16,000 cpm
290 x 105 x 50 mm / 1024 g
• Wide range of measurements
• Synchronized cross-cylinders
• Protection of optics against pollution
• Availability of auxiliary lenses
• Quick and accurate results
• Easy management and clear scales
• Sphere: -29.00 D ~ + 26.75 D (step: 0.12/0.25/0.5/1/2/3 D)
• Cylinder: 0.00 D ~ 8.75 D (step: 0.25/0.5/1/2/3 D)
• Cylinder axis: 0 ~ 180 ° (spacing: 1 / 5 / 15 / 30 / 45 °)
• Inter-transparent distance PD: long range: 48 ~ 80 mm, close range: 45 ~ 75 mm (spacing: 0.5/1.0 mm)
• Working distance: 35 ~ 70 cm (step: 5 cm)
• Prism: 0 ~ 20 D (step: 0.1/0.2/0.5/1/2 D)
• Cross cylinder: Jackson cross cylinder ± 0.25D and ± 0.5D, double cross cylinder ± 0.25D
• Ophthalmoscope: + 1,5D + 2,0D (measuring distance 67 cm, 50 cm)
• Switch with point: Ø 1 mm
• Madoka lenses: right (horizontal), left (vertical)
• Red-green filter: right red, left green
• Polarization filter: right eye (135 °, 45 °), left eye (45 °, 135 °)
• Dividing prism: right eye (6 ∆BI), left eye (10 ∆BI)
• Solid suprachiasmatic cylinder: 0.50D, 90 ° axis fixation
• Display: 9.7 inches
• Article size: main engine housing – 362 * 83 * 299 mm, keyboard – 215 * 230 * 226 mm, junction box – 266 * 72 * 240 mm
• Product weight: main engine housing – 3.5 kg, keyboard – 1.5 kg, junction box – 1.3 kg
• Current consumption: 90 VA
• Power supply: 100 ~ 240 V, 50/60 Hz
• Quality: Grade 1
Liquid crystal table for demonstration of optotypes to test visual acuity. Includes a set of tables for checking visual acuity in both adults and children. It is possible to check binocular and color vision. And also, it has tests for contrast sensitivity and tables for checking vision in macular degeneration
SurgiMove is ideal for a wide range of surgical procedures. The advanced design offers multiple positions, including 360-degree adjustable armrests.
Request a call